Every season deserves a good start! Since the window for planting is short, it’s important to maximize every opportunity. With the S-TECH 012P track system, you can ensure efficiency while improving seeding quality. This track system will allow you to increase your efficiency by filling your seed tanks to their maximum, while protecting your land from compaction and offer the best growing conditions for your seeds. The installation of the S-TECH 012P is quick and does not require any modification to your planter. The S-TECH 012P is compatible with Case IH 1250, 1255 and 2150 from 12 to 24 rows.
Interested in getting the most out of your planter? The Ryan NT Coil Wheel System is proving to have the edge. With the ability to limit cracking, close the furrow and self-clean the coil closing wheel allows you to be more confident for better results. If you are tired of replacing worn rubber gauge wheels, the spring steel gauge wheel is the answer. In addition, the coil design acts as a cushion to overcome a bumpy ride and augers the dry soil away while the coil closing wheel augers in. The system gives you more bang for your buck!
The Ground Control II clutch is a simple, affordable direct replacement for the JD Row Command clutch.
Features:
Use with Pro-shaft row units, including Pro Series XP and MaxEmerge 5 planters.
Clutch design locates inside the seed meter transmission.
Uses existing planter flex shaft.
Smooth and seamless installation.
Ag Express® Electronics is the leading provider of service, repair, and support in precision ag, serving all North America from four locations in Nebraska, Iowa, and Indiana. We are 100% employee-owned!
Ace Pump Corporation recently announced the introduction of its new Pro 5 Series pumps with advanced features to improve reliability and prevent costly downtime. The new models are updated versions of the popular Ace FMC-HYD series and FMC-150-HYD series pumps.
Our new Pro 5 FMCSC models feature a severe duty silicon carbide seal that resists scratching from abrasive materials, plus a stationary face with O-ring seat transferring heat into the casting to improve seal survival during short run-dry events. The Pro 5 FMCWS models incorporate Ace Pump’s exclusive Oasis WetSeal Technology to isolate the seals from abrasive and corrosive materials and prevent run-dry failure of any length.
Totally Tubular Mfg’s design for starter fertilizer tubes puts fertilizer down below the seed, right in the root system of the plant. Starter fertilizer has become a widely used practice with today’s successful farming operations.
This simple, effective design is helpful with faster plant emergence and better yields. The fertilizer tube is protected by the disc blades and welded to the factory seed tube guard. Totally Tubular Mfg offers fertilizer tubes for a variety of planters including John Deere, Kinze, Case, White and Monosem.
Our B-TOEM (Better-Than OEM) double-disc opener allows you to seed into hard soils covered in heavy tough residue, while maintaining flexibility to resist breakage in rocky and high foliage conditions.
As these blades are used, their doubled rolled beveled edges wear sharper and hold their edge longer, retaining 20% more diameter on average than standard blades. Our patented, heat treated blades gives the B-TOEM longer life.
B-TOEM™: Rockwell 58, 205 HD peer bearing, 5/16” rivets, heavy duty hub.
VERSUS
OEM/STANDARD: Rockwell 50, 204 HD peer bearing, 1/4” rivets, standard hub.
The Martin-Till 2nd Stage closing system has either a 6”x12” or 4”x12” rubber press wheel that seals and levels air pockets left in seed trench to ensure ideal seed to soil contact. Our cam adjust allows adjustment of pressure applied by press wheel to allow for a gently packing of the soil over the seed. The second stage mounts easily to most Double V style OEM closing wheel brackets. Our 14” with either 14 or 18 tooth razor wheel break side wall while cupped design squeezes the soil towards seed, ensuring good seed to soil contact.
A&I Products is committed to bringing producers new products at economical prices with high standards of quality. Over the last year, A&I Products has introduced new stainless-steel items for Air Seeder Carts, and NOW new replacement wear and repair parts for row crop planters. This initial offering features several items that fit John Deere Max Emerge applications. These products include disc openers, seed tubes, gauge wheels, closing wheels, drive chains, arms and bushings, and more. When you need a quality product at a lower cost, see your local A&I Products dealer or find one online at www.aiproducts.com.
A couple of new closing wheels options that Martin-Till is introducing is our fCrusher & fCrumbler. The fCrusher with the tapered tooth design allows firming on one side and crumbling on the other. Long life ductile 9.5 lbs. cast iron wheel will run for years while the fCrumbler mulches and firms the seed trench without smearing or packing the seed trench. This cleat design prevents mud build up from wet conditions or fertilizer application that are common with a solid rubber wheel. Both come with the Martin Duty, PEER Seed Extreme 6 lip seal bearing.
Travis Seed Carts are made with American steel in the heartland where we know farming and take pride in a job well done. Carts are available as center flow box style with 2, 4, or 6 box capacity or true bulk carts of 240, 275, or 375 seed units. All models can be ordered with an auger or conveyor and feature self-contained hydraulic systems, DOT compliant trailer, scale and talc options, and powder coat finish in 5 standard colors. Dealer opportunities available.
Post a comment
Report Abusive Comment